FE-MOD33-30-150 Modular Series

Features:

  • Power range: 30~150kVA
  • Module: 10/15/20/25/30kVA (2U)
  • Hot Swappable Modular Design:
    • System cabinet includes power module, bypass module, monitor module, power modules, all of these can be adapted in integrated standard cabinet.
    • All modules are hot-swappable.
  • Green Power Saving:
    • High input factor reaching up to 0.99.
    • High efficiency up to 96%.
    • THDI < 3% (100% non-linear load), THDI < 5% (50% non-linear load).
    • Dormancy mode can be set, when load rate is very low, some power modules don’t work and transfer to dormancy mode, and the power module in dormancy mode will replace the working module regularly, in this way the power modules can be used equally to extend system lifetime.
  • High reliability:
    • Wide input voltage range, line voltage range is 138-485V (phase voltage 80-280V).
    • Inside of the cabinet, there are multiple and redundant communication bus to control the system. Failure of one module will not affect system operation.
    • Removal of the power modules, control or monitor modules will not affect the functioning UPS
  • Parallel N+1 Function:
    • Support parallel operation up to 6 units.
    • Up to 900 KVA.
    • Battery bank can be shared.
  • Smart Battery Configuration:
    • 3 intelligent charging methods.
    • Long backup time is possible due to high charging current.
    • Wide range of battery selection (30-50) blocks.
  • Suitability for all types of loads:
    • Fully inductive, capacitive, or resistive loads are possible.
    • Output P.F =1
  • Intelligent management:
    • 7 inches colorful touch screen.
    • Power module can upgrade inside cabinet.
    • Support recording and exporting historic and fault logs through wide time span.
    • Support RS485, SNMP, dry contact card, support RJ45 interface and CAN interface to BMS and third-party communication.